Practical, sourced coverage of AI and outsourcing for ecommerce and retail operations

What product identifiers will EU customs require on low-value parcels from November 1, 2026?

Disclosure: Cart Signal is published by Uassist.ME, which sells customer-support, order-ops and back-office staffing, so it has a commercial interest in this topic. No company named below paid for coverage. Vendor documentation is labeled as such. This is general information, not customs or legal advice.

Short answer: From Nov 1, 2026, customs declarations for imported goods sold at a distance to EU buyers, with an intrinsic value of EUR 150 or less, must carry product identifiers (PIDs) for every product (European Commission guidance, version of 5 Oct 2026). At minimum, that is the seller's or platform's own product ID and the manufacturer's product ID, plus a standard barcode such as an EAN where one exists. Filing them has been voluntary since July 1, 2026. Merchants who ship to the EU from outside it should check now that every variant in their catalog has these fields filled in.

What changes on November 1, 2026?

The European Commission's guidance for member states and trade says the new PID requirement applies to distance sales of imported goods with an intrinsic value of up to EUR 150, mainly business-to-consumer sales. Business-to-business shipments are in principle not concerned. Operators could file PIDs voluntarily from July 1, 2026, without sanctions; "Effective enforcement starts from 1 November 2026" (EC guidance, 5 Oct 2026). The guidance is explanatory and not legally binding. The current legal text (Annex B of the UCC delegated act) doesn't state a value limit; the guidance says the Commission "is in the process of amending Annex B, to clarify that the requirement only applies to goods with an intrinsic value not exceeding EUR 150."

The carriers and platforms we've checked now apply the EUR 150 line, with one exception. DHL says "the requirement applies to shipments with an intrinsic value not exceeding EUR 150" (DHL, checked 2026-10-28); when we checked on Oct 26, its page said the rule applied regardless of value. FedEx's October 2026 guide says PIDs are mandatory "when the total shipment has an intrinsic value of EUR 150 or less" (FedEx, PDF), and Shopify's changelog says the rule covers "direct-to-consumer parcels valued under €150" (Shopify Changelog, Oct 24, 2026). Shippo, a shipping-software vendor, is the exception we've found: it says the rule "applies at any value, even though most affected shipments fall under €150." Our view: until the Commission's amendment is published, check your own carrier's or platform's rule before shipping higher-value consumer parcels without identifiers.

A transition period? FedEx says so (unconfirmed). FedEx's Canada page says "the European Commission has asked the EU Member States to take a pragmatic and collaborative approach during a transitional period to minimize trade disruption, currently expected to end early 2027," and that FedEx "will apply interim measures to align with this approach when the PID is missing." It adds: "Customers should not view this as a postponement of their compliance obligations" (FedEx Canada, checked 2026-10-28). We haven't found this in any Commission text. The Commission's guidance (version of 5 Oct 2026) still says "Effective enforcement starts from 1 November 2026," Dutch Customs (updated 22 Oct 2026) says "Starting 1 November 2026, you are required to include product identifiers," and neither DHL's page nor FedEx's Lithuania page (FedEx Lithuania) mentions a transition. Our view: plan for Nov 1, and don't count on a grace period at your carrier or in the destination country.

Dutch Customs confirms the Nov 1 date and says the rule "applies throughout the European Union." It ties the requirement to Commission Delegated Regulation (EU) 2026/1022 of 30 April 2026 (Dutch Customs, updated 22 Oct 2026).

The Commission explains the purpose: e-commerce imports into the EU totalled almost 5.9 billion items in 2025, and in targeted inspections across the EU in 2025 (cosmetics, protective equipment, food supplements, toys and electronics), over 60% of checked products failed EU standards (European Commission, 8 Jun 2026). The Commission's guidance says the point of the identifiers is to let customs scale up the outcome of one product check to all products that present a similar risk.

Which three identifiers are required?

Identifier Who assigns it Required? Customs document code
M-PID (merchant product identifier) The online seller, marketplace or platform Always, "in all cases, with no exception" C127
NS-PID (non-standardised manufacturer product identifier: the maker's own code, not based on an international standard) The manufacturer, producer or product supplier Always; if none exists, they are expected to assign one (or reuse the S-PID) C128
S-PID (standardised manufacturer product identifier, e.g. EAN or ISBN) The manufacturer, producer or product supplier, under an international standard Only where one exists; if none exists, the declaration says so with code Y081 C129

Source: EC guidance, 5 Oct 2026, section 8; Dutch Customs.

Points from the Commission's guidance that matter for catalog teams:

The codes apply when the declaration uses the additional procedure codes F48, F49 or F53, which Dutch Customs describes as IOSS, the special arrangement, and the standard B2C declaration.

A note on data elements. The Commission's guidance puts C127–C129 in data element 12 03 and the "no S-PID" code Y081 in data element 12 04. Dutch Customs' page (updated 22 Oct 2026) tells users of its own systems to enter Y081 "in data element 12 02 of the DECO and DMS declaration systems." Both put C127–C129 in 12 03; they conflict only on Y081. Check with your member state's customs authority or your broker which data element your declarations should use.

What happens when you buy a label?

Some platforms and carriers check the identifiers when you buy the label, before customs sees the parcel.

How does this connect to the EUR 3 duty and the handling fee?

The identifier rule sits alongside two charges on low-value imports:

Later, from July 2028, the Commission plans an EU Customs Data Hub.

What should catalog teams do before November 1?

The steps below are our advice.

  1. Audit every variant, not just every product. Identifiers are needed per product as sold, so check sizes and colors separately.
  2. Confirm your M-PID. Usually your SKU or the platform's own product ID. Make sure it is stable and unique on each storefront.
  3. Collect manufacturer IDs. Ask suppliers for their own product code (NS-PID; the Commission's example is a model code combined with a colour) and any EAN, UPC, GTIN or ISBN (S-PID). For private-label goods, decide who acts as manufacturer and assigns the NS-PID. Shopify variants can now hold up to 20 barcodes, each typed UPC, EAN, ISBN, GTIN, ASIN or Custom, and "Channels continue to read the first barcode provided" (Shopify Changelog, Sep 8, 2026). Set the barcode type correctly, since Shopify's EU identifier setup reads barcodes by type.
  4. Don't fake it. Leave a field empty rather than entering "N/A," "0" or a dash, and don't use serial or batch numbers where a model-level identifier exists.
  5. Fix bundles. List the identifiers for every component of a bundle or gift set.
  6. Ask your broker, IOSS intermediary or platform how they want the data delivered, and when.
  7. Re-check after catalog changes. New variants, migrations and bulk imports are where gaps appear.

Example: Shopify. For labels bought in the Shopify admin, Shopify reads identifiers from each variant's barcodes (see above). Merchants using Global-e get different instructions. Global-e, a cross-border ecommerce vendor, tells its Shopify merchants: "From 1 November 2026 you need to add two pieces of product data in Shopify. Your SKU already reaches us and needs no action." Its documentation offers two ways to supply the manufacturer identifiers: Shopify's variant Barcode field, or two Global-e metafields (globale.mididentifier and globale.standardcode). It says data must be set for each variant, placeholders such as "NA," "N/A," "0" or "-" should not be used, and new variants don't inherit values, so they need checking after migrations (Global-e docs; vendor documentation for its own customers). Other platforms and intermediaries will have their own setup.

Clean product data helps beyond customs, too. See How should merchants prepare for AI shopping agents? for why structured catalog data matters for AI shopping tools.

FAQ

When do EU product identifiers become mandatory?

From Nov 1, 2026, for customs declarations covering distance sales of imported goods worth EUR 150 or less. Filing them has been voluntary since July 1, 2026.

What are M-PID, NS-PID and S-PID?

The M-PID is the product ID assigned by the online seller, marketplace or platform. The NS-PID is the manufacturer's, producer's or supplier's own product code that isn't based on an international standard. The S-PID is a standard identifier such as an EAN or ISBN. The M-PID and NS-PID are always required; the S-PID is required only where one exists.

What if my product has no EAN or barcode?

The S-PID is only needed where one exists. If there isn't one, the declaration records that with code Y081. You still need the M-PID and NS-PID. On Shopify, you turn on that declaration in the Shipping section's More details card on the product or variant page; without it, from Nov 1 Shopify won't sell a label for an EU parcel worth €150 or less.

Does this apply to B2B shipments?

The Commission's guidance says the requirement mainly concerns business-to-consumer distance sales, and that B2B shipments are in principle not concerned.

Is the EUR 3 duty charged per parcel?

No. It is charged per item, meaning goods with the same tariff classification. Five T-shirts in one parcel pay EUR 3; a T-shirt and a watch pay EUR 6.

Sources

All checked 2026-10-28.